top of page
  • High transparency and resistance to yellowing, the visual effect is similar to transparent thermoplastics, such as acrylic adhesive (PMMA)
  • Possess excellent post-processing transparency (polished, sprayed with UV high-transmitting oil)
  • Low release force, good molding accuracy,

eResin-PMMA Like

Color: Clear

    Resin type: eResin-PMMA Like Applicable wavelength (nm): 395-405

    Density (g/cm³): 1.05-1.15 Viscosity (25°C, MPa *s): 300 Surface hardness (Shore D): 70 Tensile strength (MPa): 58 Elongation at break (%): 10 Bending strength (MPa): 30

    IZOD impact strength (J/m): 15


    How to store consumables? Consumables should be stored in a place with high air humidity and avoid prolonged exposure to light.


    Why does the model change color after it is printed and placed?

    After the model is printed and cleaned with high-concentration alcohol, it needs to be cured with a UV lamp for 1-2 minutes to prevent air humidity from affecting the model. If no post-processing is performed, the model will become red. You can also use a microwave oven to remove yellow and red, soak the model in hot water and put it in the microwave for 30 seconds.


    How to solve the discoloration phenomenon after the model is cured for a long time?

    After the model is left for a few days, the yellowing will fade away.


    How to achieve high transparency effect?

    It can be polished and sprayed with UV-resistant high-transmitting oil to achieve better transparency.


    Why does the resin appear lavender?

    The purple color is because anti-yellowing raw materials are added to the resin, and the model will not be affected when it is printed. The purple color of the model will gradually disappear after the secondary curing.


bottom of page